Viva-ProE System

Proven performance in a reliable, next generation bench-top system

  • Up to 133 EMIT® tests per hour with two reagents
  • Up to 65 EMIT® tests per hour with three reagents 

Reagent system
  • EMIT reagent rotor — with 13 positions for 14 mL bottles and 13 positions for 28 mL bottles
  • All positions in both rotors can be assigned as R1, R2, and R3
  • The reagent rotor compartment is cooled to 8–12°C (absolute up to 25°C ambient temperature)
  • Reagent volumes:
       – Reagent 1 volume 110–399 μL
       – Reagent 2 volume 10–289 μL
       – Reagent 3 volume 10–289 μL
  • Aspirated reagents are heated, with level detector and integrated stirrer
Sample system – providing semi-continuous
  • Sample rotor contains:
       – 50 positions for barcoded tubes
       – 12 positions for tubes without barcodes
       – 1 blank and 1 washing position
  • Primary tubes (13 or 16 mm OD)
  • Positions can contain 5 mL or 10 mL primary tubes or sample cups
  • Sample volume 1 – 30 µL per test, programmable in steps of 0.1 µL
  • Sample probe with level detection and integrated stirrer
Pipetting system
  • Flex Fluidics syringes
  • Reagent syringe 1000 μL
  • Sample syringe 100 μL
Cuvette rotor
  • Semi-disposable rotor with 48 cuvettes, path length 6.8 mm
  • Minimum measuring volume 200 μL
  • Measuring temperature 37°C controlled by Peltier elements
Washing units
  • Cuvette rinsing with 4 x 500 μL of treated water:
       – The unit is equipped with liquid sensors
       – Waste is separated into diluted and
          concentrated waste

        – Cuvettes are dried before use

Light sourceQuartz-iodine lamp 12 V – 20 W
Wavelength range
  • Automatic wavelength selection by an 8-position filterwheel (340, 415, 505, 546, 570, 600, 660, 700 nm)
  • Half bandwidth 8 to 12 nm
Photometric rangeAbsorbance -0.1 to 3.0
Ambient temperature
  • 15–32°
  • Relative humidity 15–85% (non condensing)
Calculation modes
  • Linear regression
  • Modified cubic spline
  • Syva® 4 parameter logit log
Quality control
  • Up to 6 controls per parameter (up to 12 controls programmable per rotor configuration)
  • Westgard rules
  • Levey-Jennings plots
  • CPU: Intel Celeron M 575 2 GHz
  • Touchscreen monitor: 15.6 inch, 1366 x 768 pixels
  • Ports: 1 serial, 4 USB, and 1 ethernet port       
  • The application supports one printer
  • Most printers supported by WINDOWS can be connected
Barcode reader (option)

The Viva-ProE™ is equipped with an internal barcode reader to read barcoded sample tubes. An optional hand-held barcode reader is available.

LanguagesEnglish, French, German, Italian, Spanish; others on request

Width: 125 cm/49.2 in

Depth: 62 cm/24.4 in

Height, excl monitor: 75 cm/29.5 in

Weight: approx. 93 kg/205 lbs (excl. monitory

arm and panel PC)


The products/features (mentioned herein) are not commercially available in all countries. Due to regulatory reasons their future availability cannot be guaranteed. Please contact your local Siemens organization for further details.

Did this information help you ?
Thank you for your response
We detected numbers and/or an '@' symbol in your comment. Are you trying to enter a phone number or email address so that we may contact you, please contact us via our email form instead.

Note: to get a direct personal response, please contact us via our email form.

Thank you